Setting up your Mesh
- Connect the Mesh unit to a power outlet. When the LED is flashing red, your Mesh unit is ready to pair with the GigaHome Blast.
- Press and hold the WPS buttons on the Mesh unit and then on the GigaHome Blast for 3 seconds (less than 30 seconds apart). The LEDs will flash green while attempting to pair.
- Use the solid green LED indicator (displays for 60 seconds at end of pairing cycle) to determine the ideal location for your Mesh unit. If necessary, relocate it to a more ideal distance from your GigaHome Blast and confirm successful pairing after the Mesh reboots (repeating steps 2-3 as needed).
- Once successful pairing is complete the GigaHome Blast and Mesh LEDs will both show a solid green color. It may take several minutes to reach this state.
For additional help or support contact RS Fiber Technical Support at (800) 628-1754.